Injection-molded parts suppliers in Ohio
Sample reportPage 1 of 6
Sample sourcing studyOctober 21, 2026

Injection-molded parts suppliers in Ohio

Make The lead, Ferriot second source, DEIMLING/jeliho and Venture fallbacks.

Newton Falls100 km
75 presses 55-1100 tons
Dayton, OH
The: Homepage gives a different press count: 75 presses3
2,250 tons
Akron, OH
Ferriot: Products: enclosures, housings and assemblies5–6
780 tons
Cincinnati, OH
DEIMLING/jeliho: Injection molding press range is 35 to 780 tons9
Sites in Ohio and the US
Headquarters
DaytonAkronCincinnatiNewton Falls200 km
  • Headquarters
  • 75 presses 55-1100 tonsDayton, OH The: Homepage gives a different press count: 75 presses3
  • 2,250 tonsAkron, OH Ferriot: Products: enclosures, housings and assemblies5–6
  • 780 tonsCincinnati, OH DEIMLING/jeliho: Injection molding press range is 35 to 780 tons9
the five ranked suppliers
1Lead
The
2Second source
Ferriot
3Fallback
DEIMLING/jeliho
4Fallback
Venture
5Watch
Innovative
The answer

Send the RFQ to all four, starting with The.

Lead with The Minco Group, nearly 80 ASPM presses in Ohio; second-source Ferriot in Akron, whose ISO 9001:2015 certificate runs to 2029.1–3

Who gets the RFQ

Four suppliers, led by The.
  1. Lead
    The
    A Dayton group with toolmaking roots and ITAR registration; confirm that its molding plant holds ISO certification.3, 15–17
    20 of 20
  2. Second source
    Ferriot
    A long-running Akron molder with an ISO certificate and capacity for large parts.5–7, 18–19
    19 of 20
  3. Fallback
    DEIMLING/jeliho
    A molder near Cincinnati that runs around the clock on one Ohio site.20–22
    18 of 20
  4. Fallback
    Venture
    An IATF-certified private molder in Newton Falls with a customer award.12, 23–25
    17 of 20
Watch
The’s lead rests on 20 points that come from one website each; without them it scores 0, below Ferriot.1, 3, 26

Next steps

Five steps, starting with the RFQ to The, Ferriot, DEIMLING/jeliho and Venture.
  1. 1
    Ask The Minco Group for an ISO 9001 certificate covering the ASPM molding plant before sending drawings.
  2. 2
    Send the same RFQ to Ferriot and Deimling/jeliho through their quote pages.
  3. 3
    Ask Deimling/jeliho for its renewed ISO certificate from ABS Quality Evaluations.
  4. 4
    Ask Venture Plastics to confirm Newton Falls, not El Paso, would mold the parts.
  5. 5
    Attach the 8 open questions (p. 6) to the RFQ.
Injection-molded parts suppliers in Ohio · The answerSample report · 2
Scorecard

The scores 20 of 20; Ferriot 19.

HQWeighted totalof 20; by criterion
1Lead
Dayton, OH
20
8+8+4
2Second source
Akron, OH
19
8+8+3
3Fallback
Cincinnati, OH
18
6+8+4
4Fallback
Newton Falls, OH
17
8+6+3
5Watch
Dayton, OH
17
6+8+3
Injection molding
48 pts
48 pts
36 pts
48 pts
36 pts
Venture names the most customers (7); The next (1).
Processes
17processes1, 3
plastic injection molding, tool and…
16processes5–8
custom injection molding, structural…
13processes9, 20
plastic injection molding, custom…
9processes27
thermoplastic injection molding…
12processes28–29
plastic injection molding, mold making
Finishing in-house
12finishing ops1
sonic welding, laser welding
9finishing ops5, 7
Painting and finishing, Pad printing
12finishing ops9–10
In-house machining and drilling, Hot…
8finishing ops27
Sonic welding, Hot plate welding
8finishing ops13–14, 29
Decorating, Assembly
Ohio plants
48 pts
48 pts
48 pts
36 pts
48 pts
Sites in Ohio and the US
one per city
1site26
HQ Dayton
1site30
HQ Akron
Amelia, Ohio plant9, 31Q5
1site11, 32
HQ Newton Falls
1site29
HQ Dayton
Certificates
your must-haves first
ISO 9001:2015 (Minco Tool & Mold…)3
+3 more
ISO 90015, 19, 33
+1 more
ISO 9001:201521, 31, 34
ISO 9001:201512
+1 more
ISO 9001:201513, 28
Molding capacity
44 pts
33 pts
44 pts
33 pts
33 pts
Ferriot leads on largest press at 2,250 t; next Innovative at 1,700 t.
Presses
801
To askQ2
To askQ2
1911
32 machines, 75–1,700 t13, 29Q2
Before award
the condition to meet
The ISO certificate names the tool shop, not the molding division.3, 15–17
Only one site, in Akron. No IATF certificate was found.5–7, 18–19
Confirm that its ISO certificate has been renewed.20–22
Part of its capacity is in El Paso, Texas11–12, 23–25

Each supplier scored 0–4 per criterion against a published rule; the two asks in your brief count double. The rules, the facts behind every score and the numbered sources are in the online appendix.

Grey: a figure for something else (a group’s, an estimate) or part of an answer
Q5: an open question for the RFQ
Injection-molded parts suppliers in Ohio · ScorecardSample report · 3
Supplier profiles

The

The Minco Group (ASPM Plastic Injection Molding division) · mincogroup.com
Lead
Supplier profile · 1 of 3

A Dayton group with toolmaking roots and ITAR registration; confirm that its molding plant holds ISO certification.3, 15–17

ITAR registered, per its own website.3, 16

Founded in Dayton, Ohio in 1954.15, 17

75presses, 55-1100 tons3
Homepage gives a different press count
4504, 35
People
all sites
202,000sq ft1
Plant area
1,100t3
Largest press
80 presses
801
Production lines
13
Named customers
OEMs, Tier 1 / 2 suppliers
195415, 17, 26
Founded
ISO 9001:2015 (Minco Tool & Mold…)3
Certificates
+3 more
Processes
Plastic injection molding, tool and mold building, CNC precision machining · +3 more1, 3
Machines
55–1,100 t · 80 presses3
Resins
ABS, polycarbonate, nylon, engineering resins, glass-filled compounds, flame-retardant…3
Machining and finishing
Sonic welding, laser welding, vibration welding, heat staking, pad printing, annealing1
Head office in Dayton, OH.26

References

OEMs, Tier 1 / 2 suppliers
ASPM is trusted by OEMs and Tier 1 / 2 suppliers across the Midwest for high-volume molding3

Strengths

  • Injection molding: two-shot, insert, overmolding, gas assist and long glass fiber molding1
  • Ohio plants: ASPM molding plant is 202,000 sq ft; LinkedIn gives a Vandalia, Ohio address1, 26

Watch-outs

  • The ISO certificate names the tool shop, not the molding division3, 15–17

Recent news

  • Apr 15, 2026
    Minco Group announces booth at the NPE 2027 plastics trade show in Orlando36

Company channels

Website
mincogroup.com
RFQ page
mincogroup.com/contact-us
Phone
(937) 890-0322
Every score for The, and the facts behind it, is in the online appendix.
Injection-molded parts suppliers in Ohio · Supplier profilesSample report · 4
Supplier profiles

Ferriot and DEIMLING/jeliho

Ferriot Inc. · ferriot.com
Second source
Supplier profile · 2 of 3

A long-running Akron molder with an ISO certificate and capacity for large parts.5–7, 18–19

Its website names ISO 9001.5, 19

Presses up to 2,250 tons for large parts and structural foam.5–7, 18–19

15037
People
Processes
Custom injection molding, structural foam molding, tool design, finishing, assembly · +1 more5–8
Head office in Akron, OH.30

Strengths

  • Injection molding: structural foam, gas assist, insert, overmolding and straight injection, including large parts5–6, 8

Watch-outs

  • Only one site, in Akron. No IATF certificate was found5–7, 18–19

Company channels

Website
ferriot.com
RFQ page
ferriot.com/request-a-quote
Phone
(330) 331-6746
Every score for Ferriot, and the facts behind it, is in the online appendix.
DEIMLING/jeliho Plastics · deimling-jeliho.com
Fallback
Supplier profile · 3 of 3

A molder near Cincinnati that runs around the clock on one Ohio site.20–22

Runs three shifts, 24 hours a day, 7 days a week.20–22

Kept full capacity during COVID-19.20–21

5338
People
Processes
Plastic injection molding, custom injection mold making · +4 more9, 20

References

no names given
The history page says its customer list includes big local, national and international names, but names none10

Strengths

  • Injection molding: certified scope covers molds and molded parts; no two-shot or insert molding named20, 31

Watch-outs

  • Confirm that its ISO certificate has been renewed20–22

Company channels

Website
deimling-jeliho.com
RFQ page
deimling-jeliho.com/quote
Phone
513-752-6653
Service
24/720–21
Every score for DEIMLING/jeliho, and the facts behind it, is in the online appendix.
Injection-molded parts suppliers in Ohio · Supplier profilesSample report · 5
Risks

DEIMLING/jeliho carries two of the four risks to manage.

Exhibit 1
Four risks to manage before award.
Each risk and the suppliers it affects
RiskAffects
1
ISO 9001:2015 is named for Minco Tool & Mold; the ASPM molding division is not named as certified.3
The
2
ISO 9001:2015 certificate No. 55652 expires 2026-12-03; confirm it has been renewed.31
DEIMLING/jeliho
3
ISO 9001:2015 claim has no published registrar, certificate number or expiry date.13
Innovative
4
No lawsuits, closures or bankruptcy were found in the sources read.5, 39
Ferriot, DEIMLING/jeliho

Source: mincogroup.com [3]; ferriot.com [5]; ipmolders.com [13]; deimling-jeliho.com [31]; zoominfo.com [39]

Open questions for the RFQ

Seven questions for the RFQ, by supplier.

One more question, for Innovative, is in the online appendix.

For every bidder2 questions
  1. 1
    Confirm in writing: ISO 9001.
    Why: Your brief requires it.
  2. 2
    Ask every bidder how many production lines it would run for the order.
    Why: Decides molding capacity.
The
1 question
  1. 3
    Does the ASPM molding division hold its own ISO 9001 certificate? Also confirm the actual press count and headcount, since sources disagree.
    Why: Decides injection molding, one of the criteria that count double.
Ferriot
1 question
  1. 4
    Will parts run in Akron or at the Plain City site from the Thomas Tool & Mold acquisition? Also ask for the current employee count.
    Why: Needed before award.
DEIMLING/jeliho
2 questions
  1. 5
    Confirm its sites in Ohio and the US, by city.
    Why: Decides Ohio plants, one of the criteria that count double.
  2. 6
    Ask for the renewed ISO 9001 certificate from ABS Quality Evaluations, and the largest part size it can mold.
    Why: Needed before award.
Venture
1 question
  1. 7
    Ask for the ISO 9001 and IATF certificates, and confirm that Newton Falls would run the parts.
    Why: Needed before award.
Injection-molded parts suppliers in Ohio · Risks and Open questions for the RFQSample report · 6

Online appendix: the open questions, scoring rules, evidence and sources. On screen only; the PDF has the pages above.

Open questions for the RFQ

One more question for Innovative.

Innovative
1 question
  1. 8
    Ask for the ISO 9001 certificate with its registrar, number and expiry date.
    Why: Needed before award.
Appendix A · Scoring rules

How the scorecard was scored

Each supplier scores 0–4 per criterion against these rules; p. 8 shows the evidence.

CriterionLooked at
Injection molding

Counts double.

Processes, Finishing in-house
Ohio plants

Counts double.

Sites in Ohio and the US, Certificates
Molding capacity
Presses

Each supplier scores 0–4 per criterion, 4 the best. On a cost or risk criterion, 4 means the least cost or risk.

Weighted total: the two asks in your brief count double; the most a supplier can score is 20.

A cell nothing backs is left unscored, never counted as zero.

Online only · Open questions for the RFQ and Appendix A · Scoring rulesSample report · 7
Appendix A · Evidence

What is behind each score

Score, the facts behind it and their numbered sources (Appendix B, p. 12).

1Lead
The
2Second source
Ferriot
3Fallback
DEIMLING/jeliho
4Fallback
Venture
5Watch
Innovative
Injection molding
Counts double.
48 ptsQ3
Two-shot, insert, overmolding, gas assist and long glass fiber molding.1
48 pts
Structural foam, gas assist, insert, overmolding and straight injection, including large parts.5–6, 8
36 pts
Certified scope covers molds and molded parts; no two-shot or insert molding named.20, 31
48 pts
Custom thermoplastic, insert and two-shot molding, with in-house welding and printing.27
36 pts
Also lists compression, rotational, structural foam and RTV molding, plus in-mold labeling.14, 29
Ohio plants
Counts double.
48 pts
ASPM molding plant is 202,000 sq ft; LinkedIn gives a Vandalia, Ohio address.1, 26
48 pts
One site at 1000 Arlington Circle, Akron, named on the certificate.2, 7
48 ptsQ5
Single plant at 4010 Bach-Buxton Rd, Amelia, named on the certificate.9, 31
36 pts
The Ohio plant has 19 presses; a second plant is in El Paso, Texas.11–12
48 pts
Office on Dog Leg Road, Vandalia; plant on Webster Street, Dayton.28–29
Molding capacity
44 pts
ASPM page says nearly 80 presses; the homepage says 75.1, 3
33 ptsQ2
Fewer presses, but shot sizes up to 344 oz and tools up to 20…8
44 ptsQ2
Three shifts, 24/7, in a footprint over 108,000 sq ft.9–10, 20–21
33 pts
Two plants, 123,000 sq ft and 200 employees in total.11
33 ptsQ2
120,000 sq ft production facility; parts up to 110 ounces.13, 29
Weighted total208+8+4198+8+3186+8+4178+6+3176+8+3
Online only · Appendix A · EvidenceSample report · 8
Appendix A · Method and long list

How the study was run

On October 21, 2026, the study read 169 web pages in 33 min and checked 21 findings on a second website.

Exhibit 2
41 found, 5 ranked.
Companies at each stage
41Found
38Fit the brief
20Researched in depth
5Ranked
CompanyTypeHomeReason
Ranked (5)
The Minco Group (ASPM Plastic Injection Molding division)3High-volume…Dayton, US
Lead: dayton, Ohio. Its ASPM division runs 75 presses (55 to 1,100 tons) in a 202,000 sq ft plant. ISO 9001:2015 is…
Ferriot Inc.5Family-owned…Akron, US
Second source: akron, Ohio custom injection molder with a 200,000 sq ft plant and presses up to 2,250 tons. Site…
DEIMLING/jeliho Plastics20Custom injection…Cincinnati, US
Fallback: amelia, Ohio (Cincinnati area). Site says it is a custom thermoplastics injection molder and contract…
Venture Plastics12Custom…Newton Falls
Fallback: injection molder headquartered in Newton Falls, Ohio. Its site now claims ISO 9001:2015 and IATF 16949…
Innovative Plastic Molders, Inc.28Plastic products…Dayton, US
Watch: vandalia, Ohio (Dayton area). Site describes precision injection molding, in-house maintenance and assembly…
Researched in depth, not ranked (15)
ASPEC (Aspec Plastics)40Custom…Cincinnati, US
Cincinnati molder with in-house molds; no ISO 9001 claim. Deimling already covers Cincinnati.
DRS Industries41Custom plastic…Toledo, US
DRS Industries went through bankruptcy and an asset sale. Its certifications are not listed on its own site.
Eagle Mold Co., Inc.42Builds injection…Carlisle, US
Eagle Mold mainly builds molds. Molding is a secondary service there.
Greenville Technology43Interior…Greenville, US
Greenville, Ohio vehicle plastics maker that serves mainly Honda; ISO and custom work unconfirmed.
GSH Industries44Custom injection…Cleveland, US
Strongsville molder with 75 to 1,500 ton presses, but no ISO 9001 claim found.
IEG Plastics45Plastic parts…Bellefontaine
IEG Plastics is an ISO-certified automotive molder in Bellefontaine. It is small, and it publishes no press count.
Online only · Appendix A · Method and long listSample report · 9
Appendix A · Method and long list · continued

How the study was run

CompanyTypeHomeReason
Researched in depth, not ranked (15), continued
Mar-Bal, Inc.46Custom…US
Molder with 50 to 1,000 ton presses and a listed ISO 9001:2008; Ohio location not checked.
Moore Industries47Custom injection…US
Moore Industries has an NQA ISO certificate and large presses. Sources disagree on its founding year and press…
Ohio Precision Molding, Inc.48Injection molder…US
Listing claims ISO 9001:2015, but city and own site are unverified.
PharoPLAST (Pharoplast)49Cleveland molder…Cleveland, US
Cleveland molder with design and tooling; ISO 9001 not seen, and Northeast Ohio is already covered.
Progressive Molding Technologies50Molder that also…Cleveland, US
Progressive Molding Technologies claims ISO compliance only, and publishes no press or staff data.
Superior Plastics, Inc.51US
Superior Plastics has two Ohio plants and a published ISO certificate. Its IATF claim has no certificate behind it, and…
Thogus52Mid…Avon Lake, US
Duplicate of Thogus; the Thogus Products entry is already in the deep list.
Thogus Products Company53US
Thogus is a certified high-volume molder in Avon Lake. Its press and staff counts differ between sources.
World Class Plastics, Inc.54Custom injection…Russells Point
Custom molder in Russells Point with in-house tooling; not screened on its own site.
Fit the brief, not researched (18)
Akron Porcelain & Plastics Co.46Injection molding…US
No homepage was given. Listing says it molds thermoset and glass-filled materials. Ohio location and ISO 9001 are not…
American Engineering Group LLC55Injection molded…Akron, US
Listed as an injection molder in Akron, but no homepage was given, so we could not read its own site or check certificates.
Automation Plastics55Injection molded…Aurora, US
Listed as an injection molder in Aurora, but no homepage was given, so we could not read its own site or check…
Calico Precision Molding56Custom…US
No homepage given and no search allowed. Listing says custom and unique-application injection molder in an Ohio…
Dinesol Plastics, Inc.57Injection molded…US
No homepage was given. Listing says it makes injection molded parts. Ohio location and ISO 9001 are not…
Endura Plastics56High-volume…US
Listed in an Ohio directory as a high-volume precision plastic maker with 21 molding machines. No website and no city…
Esterle Mold & Machine Co., Inc., Plastics Div.57Custom injection…US
No homepage was given. Listing says it is a custom injection molder with 65 to 3,500 ton presses. Ohio location and…
EVCO Plastics56Custom injection…US
No homepage given and no search allowed. Listing says custom injection molder of thermoplastics, design through…
Jaco Products Co.46Custom…US
No homepage was given. Listing says it makes custom injection molded thermoplastic parts. Ohio location and…
K & B Molded Products, Div. of Kuhns Mold & Tool Co., Inc.58Custom plastic…US
Brief lists no homepage, and we had no search to find one. Listing says it molds plastic parts, but mold-building is its…
Miles Products, Inc.48Custom plastic…US
No homepage given and no search allowed. Listing says custom plastic injection molding for medical and other…
Molded Devices, Inc57Custom molder…US
No homepage given and no search allowed. Listing says custom molder for prototypes and production tooling, low…
Online only · Appendix A · Method and long listSample report · 10
Appendix A · Method and long list · continued

How the study was run

CompanyTypeHomeReason
Fit the brief, not researched (18), continued
Neaton Auto Products Mfg, Inc.59Plastic automotive…Eaton, US
Not screened. The brief gives no homepage, and we had no search allowed to find one. Brief says Eaton, Ohio; plastic…
Pioneer Plastics60ISO-certified…Dalton, US
Listed in Dalton as an ISO-certified injection molder, but no homepage was given, so we could not verify the claim on…
Plastic Parts, Inc.60Custom plastic…Columbus, US
Listed in Columbus as a custom plastic parts maker, but no homepage was given, so its molding process and…
Proto Plastics60Custom plastic…Tipp City, US
Listed in Tipp City as a custom plastic parts maker, but no homepage was given, so its molding process and…
Tech-Way Industries60Tight-tolerance…Franklin, US
Listed in Franklin as a tight-tolerance molder with in-house mold making, but no homepage was given, so we could not…
Velocity Group61US
Did not fit the brief (3)
Diemaster62Builds custom…Northeast Ohio
Injection mold builder (tooling house) in Macedonia, Ohio. Its site describes building molds and precision machining…
Jino Plastics63Medical device…US
Not in Ohio. The site lists an address in Yiwu, China, and a Chinese phone number. It claims ISO 9001:2015, but the…
Thomas Tool & Mold Company64Makes small…Central Ohio
Central Ohio tool and mold maker for small to medium injection tools. Injection molding is mentioned only in…
Online only · Appendix A · Method and long listSample report · 11
Appendix B · Sources

Numbered sources

Superscript numbers in the text and bracketed numbers in source lines point here.

  1. 1
    mincogroup.com
    mincogroup.com/aspm
    Two Shot Molding Cost effective way to integrate two different colors or materials into the same part.
  2. 2
    Ferriot Inc. ISO 9001:2015 certificate no. 526008 — ferriot.com, 2026-10-21
    ferriot.com/wp-content/uploads/2026/10/Ferriot__Inc._ISO_9001_Cert_Nov_2026.pdf
    Initial Certification Date: Wednesday, December 17, 2003 Current Cycle Start Date: Friday, November 20, 2026
  3. 3
    The Minco Group homepage — mincogroup.com, 2026-04-15
    mincogroup.com
    We support OEMs and Tier 1 / 2 suppliers across a variety of industries, including aerospace, defense, medical, automotive, and industrial sectors.
  4. 4
    npe365plasticssuppliersdirectory.com
    npe365plasticssuppliersdirectory.com/Listing/Company/1230544
    currently employees over 450 dedicated people and is growing
  5. 5
    Ferriot Inc. home page — ferriot.com, 2026-10-21
    ferriot.com
    Painting and EMI/RFI shielding; Digital and pad printing for decorating and branding; Ultrasonic welding and heat staking
  6. 6
    plasticsmachinerymanufacturing.com
    plasticsmachinerymanufacturing.com/injection-molding/article/13003295/ferriot-brings-smart-integration-to-massive-press-facility
    its largest injection press ever — a 2,250-ton Negri Bossi Bi-Power
  7. 7
    Ferriot About Us page — ferriot.com, 2026-09-28
    ferriot.com/about
    The company operates from a 200,000-square-foot office and manufacturing facility at 1000 Arlington Circle in Akron.
  8. 8
    ferriot.com
    ferriot.com/injection-molding/injection-processes/large-parts
    Structural Foam, Gas Assist Injection, Insert Molding, Overmolding, Straight Injection
  9. 9
    deimling-jeliho.com
    deimling-jeliho.com/concept-to-delivery
    Injection Molding Machine Range – 35 to 780 Tons
  10. 10
    DEIMLING/jeliho Plastics company website, history page — deimling-jeliho.com, 2026-10-21
    deimling-jeliho.com/history
    Just last year, 2015, Bill added another 23,000 sq.-ft. which put our factory footprint over 108,000 square feet!
  11. 11
    ventureplastics.com
    ventureplastics.com/profile
    Founded 1969 Ownership Private Employees 200
  12. 12
    ventureplastics.com
    ventureplastics.com
    Two hundred employees serve well-diversified OEM programs under an IATF 16949 quality system.
  13. 13
    ipmolders.com
    ipmolders.com
    We are an ISO 9001:2015 certified company that strives to provide the highest quality tooling and custom molding
  1. 14
    ipmolders.com
    ipmolders.com/services
    With 30-plus electric presses at your disposal, ranging from 75 to 1,700 tons
  2. 15
    mfgday.com
    mfgday.com/events/mfgday23-minco
    Minco was founded in 1954. We design and manufacture plastic injection molds and offer high-speed precision machining.
  3. 16
    rocketreach.co
    rocketreach.co/aspm-all-service-plastic-molding-profile_b6a0ec29c871cb96
    Each project is backed by ISO 9001:2015 and IATF 16949:2016 certifications, along with ITAR compliance.
  4. 17
    The Minco Group About Us page — mincogroup.com, 2026-02-06
    mincogroup.com/about-us-2
    The Minco Group includes three specialized divisions: ASPM plastic injection molding, Minco Tool & Mold, and Minco Machining & Manufacturing.
  5. 18
    sbnonline.com
    sbnonline.com/article/a-new-millennium-a-new-marketplace-ferriot-x2019-s-success-hinges-on-staying-proactive-in-an-ever-changing-marketplace
    But by 1940, it was clear market needs were changing again, and the brothers switched their focus from rubber to plastics.
  6. 19
    comanufacturers.com
    comanufacturers.com/products/ferriot-inc-comanufacturer-profile
    Ferriot, Inc. is ISO 9001:2015 certified, ensuring compliance with quality management standards in their manufacturing processes.
  7. 20
    Web search results on Deimling/jeliho Plastics (Ohio, Amelia) — deimling-jeliho.com, 2026-10-21
    deimling-jeliho.com
    Custom thermoplastics injection molder and contract manufacturer specializing in highly engineered molded components and assemblies.
  8. 21
    comanufacturers.com
    comanufacturers.com/products/deimling-jeliho-plastics-inc-comanufacturer-profile
    Deimling/jeliho Plastics is ISO 9001:2015 certified
  9. 22
    ussbchamber.org
    ussbchamber.org/deimling-jeliho-plastics-inc
    HQ Address: 4010 Bach-Buxton Rd Amelia, OH 45102
  10. 23
    wemakeithere.org
    supplychain.wemakeithere.org/manufacturers/venture-plastics-inc-hllte3om
    Venture Plastics, Inc | NEWTON FALLS, OH ... ITW Preferred Injection Molder · compliance_program · Quality Certifications · IATF16949·ISO 9001·ITWPREFERREDINJECTIONMOLDER
  11. 24
    plasticstoday.com
    plasticstoday.com/automotive-mobility/venture-plastics-earns-iatf-16949-2016-certification
    announced that it has earned the new IATF 16949:2016 certification for automotive customers.
  12. 25
    ventureplastics.com
    ventureplastics.com/news
    Venture Plastics has been granted ITW
  13. 26
    All Service Plastic Molding LinkedIn page — linkedin.com, 2026-10-21
    linkedin.com/company/all-service-plastic-molding-inc
    Founded · 1954
  14. 27
    ventureplastics.com
    ventureplastics.com/services
    Insert molding, two-shot molding and in-house welding, hot stamping, pad printing and sub-assembly.
Online only · Appendix B · SourcesSample report · 12
Appendix B · Sources · continued

Numbered sources

  1. 28
    ipmolders.com
    ipmolders.com/about
    ISO 9001:2015 CERTIFIED
  2. 29
    mfg.com
    mfg.com/manufacturer/innovative-plastic-molders-inc-dayton-ohio-815806
    custom manufacturing capabilities include: Rotational Molding, Structural Foam Molding, Compression Molding, Injection Molding, RTV Molding
  3. 30
    ferriot.com
    ferriot.com/contact
    1000 Arlington Cir Akron, OH 44306-3973
  4. 31
    deimling-jeliho.com
    deimling-jeliho.com/wp-content/uploads/2024/02/55652-Cert-30Nov2023_1.pdf
    Certification Date: 04 December 2017 Effective Date: 30 November 2023
  5. 32
    yelp.com
    yelp.com/biz/venture-plastics-newton-falls
    4000 Warren Ravenna Rd · Newton Falls, OH 44444 · Get directions · Business website · ventureplastics.com
  6. 33
    yahoo.com
    local.yahoo.com/info-15647482-ferriot-inc-akron
    Ferriot has received an ISO 9001:2000 certification from the International Organization for Standardization.
  7. 34
    DEIMLING/jeliho Plastics company website, ISO Certification page — deimling-jeliho.com, 2026-10-21
    deimling-jeliho.com/iso
    As of December 2017, we are in conformance with the requirements set forth by ISO 9001:2015.
  8. 35
    linkedin.com
    linkedin.com/company/minco-tool-&-mold
    Company size · 51-200 employees
  9. 36
    The Minco Group, NPE 2027 event page — mincogroup.com, 2026-04-15
    mincogroup.com/event/npe-2027-may-3-7-in-orlando-fl
  10. 37
    datanyze.com
    datanyze.com/companies/ferriot/14205794
    $40.7 M · 150 · 1929
  11. 38
    PitchBook company profile, Deimling/jeliho Plastics Inc. — pitchbook.com, 2026-10-21
    pitchbook.com/profiles/company/144906-13
    Deimling/jeliho Plastics Inc. has 53 total employees.
  12. 39
    Clermont Chamber event listing; company website; ZoomInfo profile — zoominfo.com, 2026-10-21
    zoominfo.com/c/deimlingjeliho-plastics-inc/33378972
    Deimling/jeliho Plastics is experiencing very low activity levels compared to other companies in the Manufacturing sector.
  13. 40
    aspecplastics.com
    aspecplastics.com/plastic-injection-molding
  14. 41
    drsinc.com
    drsinc.com/plastic-injection-molding
    Light assembly of additional components
  15. 42
    eaglemoldcompany.com
    eaglemoldcompany.com
    Tel: 937-746-3331
  1. 43
    manufacturing-today.com
    manufacturing-today.com/news/greenville-technology
  2. 44
    gshindustries.com
    gshindustries.com/injection-molding/cleveland-oh
  3. 45
    ieg-llc.com
    ieg-llc.com
    We are a proud supplier of plastic parts and assemblies to the automotive and consumer goods industries.
  4. 46
    thomasnet.com
    thomasnet.com/suppliers/northern-ohio/all-cities/injection-molded-thermoset-plastics-61020293
  5. 47
    iqsdirectory.com
    iqsdirectory.com/injection-molded-plastics/ohio
  6. 48
    thomasnet.com
    thomasnet.com/suppliers/northern-ohio/all-cities/injection-molded-plastics-60310604
  7. 49
    pharoplast.com
    pharoplast.com
  8. 50
    promoldtech.com
    promoldtech.com
    Progressive Molding Technologies serves a wide range of industries, including medical devices, consumer goods, appliances, plumbing and industrial applications.
  9. 51
    superiorplasticsinc.com
    superiorplasticsinc.com/about
    Founded in 1997, we have grown to supply several industries
  10. 52
    thogus.com
    thogus.com/areas-served/cincinnati-oh
  11. 53
    thogus.com
    thogus.com/capabilities/custom-plastic-injection-molding
    As an ISO 9001:2015 certified company, we prioritize quality and efficiency
  12. 54
    yushinamerica.com
    yushinamerica.com/feeds/blog/top-injection-molding-companies
  13. 55
    injectionmoldingmanufacturers.com
    injectionmoldingmanufacturers.com/category/ohio
  14. 56
    plasticmoldingmanufacturers.com
    plasticmoldingmanufacturers.com/category/ohio
  15. 57
    thomasnet.com
    thomasnet.com/southern-ohio/custom-injection-molded-plastics-95958385-1.html
  16. 58
    thomasnet.com
    thomasnet.com/suppliers/southern-ohio/all-cities/custom-molds-95966222
  17. 59
    inven.ai
    inven.ai/company-lists/top-19-automotive-manufacturing-companies-in-ohio
  18. 60
    findingmfg.com
    findingmfg.com/blog/top-plastic-manufacturing-companies-in-ohio-usa
  19. 61
    polymer-process.com
    polymer-process.com/injection-molding-ohio
  20. 62
    diemaster.com
    diemaster.com/home
  21. 63
    jinoplastics.com
    jinoplastics.com/medical-device-injection-molding
  22. 64
    ttmco.com
    ttmco.com
Online only · Appendix B · SourcesSample report · 13